Mutyam's Oracle Fusion Middleware Blog: SOA 11g Installation Guide

Download all the software to get started.

Oracle Database OracleXEUniv.exe
WebLogic Server wls1035_oepe111172_win32.exe
Repository Creation Utility ofm_rcu_win_11.1.1.5.0_disk1_1of1.zip
SOA Suite ofm_soa_generic_11.1.1.5.0_disk1_1of2.zip, ofm_soa_generic_11.1.1.5.0_disk1_2of2.zip
OSB ofm_osb_generic_11.1.1.5.0_disk1_1of1.zip

Oracle Database Setup:

This is the first step towards Installation of SOA Suite.

For this you need to have anyone of following versions but I will be using Oracle XE Universal database version 10.2.0.1 as it is already installed on my machine

Oracle XE Universal database version 10.2.0.1
Oracle 10g database version 10.2.0.4+
Oracle 11g database version 11.1.0.7+

Note: You can not use any other database version in 11gR1 (certification of additional database is on the road map). Specifically, you cannot use XE Standard, It must be Universal.

Note: When you are using XE, you will see a warning when you install the database schema that this database version is too old. You can safely Ignore this warning as it applies only to production environments.

Once you are done with Installation of Oracle XE, you must update database parameters. Set the processes parameter to >=500 using the following instructions.

sqlplus connect sys as sysdba
SQL> show parameter session
SQL> show parameter processes
SQL> alter system reset sessions scope=spfile sid='*';
SQL> alter system set processes=500 scope=spfile;
SQL> shutdown immediate
SQL> startup
SQL> show parameter session

SQL> show parameter processes

Schema Configuration

Note: If you want to use Oracle XE as your database, you need to set the RCU_JDBC_TRIM_BLOCKS environment variable to TRUE *prior* to running RCU

1. To create the new schema, unzip ofm_rcu_win_11.1.1.5.0_disk1_1of1.zip navigate to rcuHome\bin and open a command window and run rcu.bat

2. The bat command returns to the prompt immediately and, after a few seconds, the Repository Creation Utility opens (if you just ran the utility to drop the schema, it opens the second time much more quickly).

3. On the Welcome screen, click on Next..

4. Select Create and click on Next.

5. Enter the database information.

6. Click on Next.

7. If you are using XE, you will see a warning at this point that this version is too old. You can safely ignore this warning as it applies only to production environments.

8. The pre-requisites are reviewed. When complete, click on OK. The utility moves to the next page ---with a slight delay, just wait for it.

9. On the Select Components screen, enter DEV in the field for creating a new prefix.

10. Select the component SOA Infrastructure. Dependent schemas are selected automatically.

11. If you choose to select other components, these install instructions may not match your install experience. Also, you may have to increase processes in XE (you will get a message telling you what is required).

12. Click on Next.

13. The pre-requisites for this step are checked. When completed, click on OK.

14. Select the radio button to Use the same password for all schemas. Enter a schema password. The password welcome1 is assumed in this document but you should choose your own secure password or a different one for each schema and be sure to record your passwords as you will need them later.

15. Click on Next.

16. Review the tablespaces and schema owners for the components.

17. Accepting the defaults, click on Next, and then click on OK to create the tablespaces.

18. When the pre-requisites for this step are completed, click on OK.

19. Click on Create to create the tablespaces. This takes about two minutes.

20. When completed, click on Close.

WebLogic Installation

First, you install Oracle WebLogic Server.

1. To install WebLogic Server run wls1035_oepe111172_win32.exe

2. When the Welcome screen for the install wizard comes up, click on Next.

3. Select Create a new Middleware Home and enter: C:\Oracle\Middleware\home_11gR1.

4. Click on Next.

5. Enter email address to register for security alerts or deselect the checkbox and decline—whichever you prefer—and click on Next.

6. Select Typical, and click on Next.

7. Review installation directories.

8. Click on Next.

9. Select "All Users" Start Menu folder and click on Next.

10. Review Summary.

11. Click on Next to start the installation process. Installation takes about three minutes.

When the installation is complete, deselect the Run Quickstart checkbox and click on Done.

Installing SOA

Once the database is configured, and WebLogic is installed now you can install the SOA server into the Oracle Home on the WebLogic server. Extract ofm_soa_generic_11.1.1.5.0_disk1_1of2.zip, ofm_soa_generic_11.1.1.5.0_disk1_2of2.zip at C:\SOA (this can be any path where you want to extract these zip files)

1. In a command window, enter:

C:\SOA\Disk1\Setup –jreLoc C:\Oracle\Middleware\home_11gR1\jdk160_11

2. When the install wizard Welcome screen comes up, click on Next.

3. Wait for the pre-requisite check to complete (it's quick!).

4. Click on Next.

5. On the Specify Installation Location screen, select the middleware home:

C:\Oracle\Middleware\home_11gR1.

6. Enter Oracle home: Oracle_SOA1. If you use a different Oracle home, then adjust accordingly when Oracle_SOA1 is referenced throughout this document.

7. Click on Next.

8. Review Summary.

9. Click on Install.

10.Wait for the installation to complete—it takes a few minutes. Click on Finish.

Oracle Service Bus (OSB) Installation

Once SOA is installed into Oracle Home we are ready to Install OSB on that.
Extract ofm_osb_generic_11.1.1.5.0_disk1_1of1.zip at C:\OSB (this can be any path where you want to extract these zip files)

1. In a command window, enter:
C:\OSB\Disk1\Setup –jreLoc C:\Oracle\Middleware\home_11gR1\jdk160_11

2. When the install wizard Welcome screen comes up, click on Next.

3. Select “Skip Software Updates” and click “Next”

4. Leave default values for location:

5. Select “Typical” Installation and click Next:

6. Pre-requisites will be checked - click Next once done:

7. Accept default locations and click Next:

8. Review the summary and click Install

9. When it reaches to 100% - click Next and Finish

Domain Creation

This step describes detail for configuring the WebLogic server domain for the SOA server.

1. In a command window, enter:
C: /Oracle/Middleware/home_11gR1/Oracle_SOA1/common/bin
Config.cmd

2. When the configuration wizard's Welcome screen comes up, select Create a new WebLogic domain, and then click on Next.

3. Select Generate a domain and select SOA Suite, Enterprise Manager, and Business Activity Monitoring. Dependent products are selected automatically.

4. Click on Next.

5. Enter the domain name: domain1. or any other desired domain name

6. Click on Next.

7. Enter the user name as weblogic and a password. The password welcome1 is assumed in this document but you should choose your own secure password and remember it for later in the document when the password is referenced.

8. Click on Next.

9. Select the Sun SDK 1.6_11 and leave Development Mode checked.

10. Click on Next.

11. On the Configure JDBC Component Schema screen, you select the components that you want to change, and then enter the property value for those components. First, select all of the components and enter welcome1 for the password in the Schema Password field.

12. With all of the checkboxes selected, enter the Service, Host, and Port values.

13. Now, look at the table. Review the Schema Owner column and confirm that the values are the same as what you configured in the Configure Schema section when you ran the RCU. Go back and review the screenshots in that section of this document for the schema owners if you do not remember them.

14. Complete the following if the schema owners need to be updated:

Deselect all the component checkboxes.
Select BAM Schema only.
Enter the Schema Owner for BAM.
Next, deselect BAM Schema and select the next one.
Enter the schema owners one-by-one.
Continue until all schema owners are entered.

15. Click on Next.

16. The data source connections are all tested.

17. If all are successful, click on Next, otherwise click on Previous and correct any errors.

18. You will now see options for optional configurations. Select Administration Server, Managed Servers Cluster and Machines and Deployments and Services.